BFTPH - AMBERLITE IR-120 PLUS (H)RESIN,CODE#69454

  • MSDS: BFTPH
  • Manufacturer: ROHM AND HAAS COMPANY
  • Product Name: AMBERLITE IR-120 PLUS (H)RESIN,CODE#69454
  • National Stock Number: 6810-00-879-6133
Product Identification

Product ID:AMBERLITE IR-120 PLUS (H)RESIN,CODE#69454
MSDS Date:01/01/1987
FSC:6810
NIIN:00-879-6133
MSDS Number: BFTPH

Responsible Party
ROHM AND HAAS COMPANY

Emergency Phone: (215)592-3000

Cage: 77902

Contractor
ROHM AND HAAS CO
PHILADELPHIA, PA 19106-2399 US

Telephone: 215-592-2521/215-592-3000

Cage: 77902

Ingredients

ION EXCHANGE RESINS (CATION EXCHANGER) 46-51%

Fraction By Weight: 48.5%

ACGIH TLV: NOT SPECIFIED

Hazards

Effects of Overexposure:NONE SPECIFIED.MAY IRRITATE EYES AND SKIN.
(FINE PARTICLES OF SAME MATERIAL HAS SHOWN CORNEAL DAMAG

First Aid

First Aid:INHALE:REMOVE TO FRESH AIR, GIVE CPR/O*2 IF
NEED;EYES/SKIN:FLUSH W LG AMTS H*2O FOR 15 MIN;INGEST:RINSE MOUTH;
GET MEDICAL ATTENTION FOR EYES, BREATHING DIFFICULTY, OR OTHER
SYMPTOMS OF OVEREXPOSURE.

Fire Fighting

Autoignition Temp:Autoignition Temp Text:800F
Extinguishing Media:CO*2,DRY CHEMICAL,WATER FOG
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA FOR FIRES AND
CONFINED AREA
Unusual Fire/Explosion Hazard:TOXIC COMBUSTION PRODUCTS INCLUDE
SOJ*2,SO*3

Accidental Release

Spill Release Procedures:USE PROPER PERSONAL PROTECTION. SWEEP UP AND
TRANSFER TO CONTAINERS FOR RECOVERY OR DISPOSAL.

Handling

Handling and Storage Precautions:STORE IN COOL DRY AREA.DO NOT HANDLE
WITH HNO*3 AND OTHER STRONG OXIDIZING AGENTS,MAY CAUSE
EXPLOSIVE-TYPE REACTIONS.
Other Precautions:AVOID SKIN AND EYES CONTACT.

Exposure Controls

Respiratory Protection:NO SPECIAL REQMNTS UNDER ORDINARY
CONDITIONS/ADEQUATE VENT.
Ventilation:NORMAL ROOM VENTILATION.
Protective Gloves:IMPERVIOUS
Eye Protection:CHEM SPLASH GOGGLES
Other Protective Equipment:SAFETY SHOWER & EYE BATH
Supplemental Safety and Health
MSDS DATED 03/26/82

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:U/K
Vapor Pres:U/K
Vapor Density:U/K
Spec Gravity:1.26
Evaporation Rate & Reference:<1.0 (BUT ACET=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:TAN BEADS;ODORLESS;PH(AQUEOUS SLURRY) 3.0 MAX
Percent Volatiles by Volume:U/K

Stability

Stability Indicator/Materials to Avoid:YES
CONC.HNO*3,OR OTHER STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:TEMPERATURES OVER 220C/428F
Hazardous Decomposition Products:STYRENE MONOMER,IDVINYL BENZENE.

Disposal

Waste Disposal Methods:DISPOSE OF COLLECTED MATERIAL IN ACCORDANCE WITH
LOCAL,STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.